ZENER 8000-V Installation Manual
_
34
IM00165
Control connections and configuration
General
The purpose of selecting particular control connections and setting various configuration parameters is to select
the required logical and speed control functions for the particular application. The configurable items can be
grouped as follows:
Category
Description
Display
Customisation of the display in terms of what variable (speed, frequency, load,
current, voltage etc) is displayed. Customisation of the output frequency display to
show user defined units. Some housekeeping functions.
Motor
Information from the motor nameplate.
Performance
Maximum and minimum speeds, acceleration rates, motor flux adjustment etc.
Protection
Current limit settings, I2t (thermal overload) etc.
Stop / Start
Choices for stopping, automatic restart options etc.
References
Choice of speed signal source to be used in local and remote modes, jog speeds.
Input / Output Assignment of particular control functions to terminals (inputs) and relays (status
outputs). These can be selected individually.
The ZENER 8000-V control terminals can be configured, on an individual terminal basis, to suit a wide variety of
applications. This provides enormous flexibility.
Factory default settings
The factory default terminal configuration provides for single direction control from either the terminal strip or
the front panel console, as selected by a local / remote input on the terminal strip. This is detailed as “Standard
Industrial Terminals”, starting on page 37.
There is a menu function to restore the terminal configuration and all parameters to the factory default state
should you wish to do so. See Load Factory Defaults.
Settings for your application
The function of each of the analogue inputs, digital inputs and status relays may be individually assigned from
an extensive list. in addition, digital inputs may be assigned to be level or edge sensitive and there are
additional internal functions including timers that are fully configurable. Many applications may be easily
configured using one of the quick setup applications listed below.
Quick Setup
To assist with quick configuration of the most frequently encountered applications, there are a number of pre-
defined applications. Terminal strip configuration and associated setup notes are provided.
