ZENER 8000-V Installation Manual
IM00165
41
Jog fwd speed
5.0 Hz
Jog rev speed
5.0 Hz
Rated Motor Amps
40.0 A
Overload Amps
40.0 A
APPLICATION: Machine Drive, Start/Stop, Jog Forward & Reverse
This application is for a typical industrial process that requires start/stop with the ability to jog the machinery in
both directions. A roll forming machine may be controlled this way. Features include but not limited to:
Individual jog forward and jog reverse speed references.
Remote potentiometer normal operating speed reference.
Relays configured for RUN and TRIP operation.
The full range of ZENER 8000-V features and functions remain available.
Expected Wiring
One Time Installation/Application choice
Load the
“
Machine/JOG -00
” application (Refer to “
Loading an Application
”, page 32).
Application Parameters
This screen displays the preset jog forward speed
required for the machine.
This screen displays the preset jog reverse speed
required for the machine.
This screen displays the value of the motor’s
name plate current. Note the default value is
model size dependent.
This screen displays the value of the overload
current setting for the motor. Note the default
value is model size dependent.
Control Board Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
+5V D1
D2
D3
D4
EN
COM SCN Vref
IN+
IN-
A
B
C
RL1
Stop/reset
Start
Jog Forward
Jog Reverse
RL2
1kΩ to 10kΩ
potentiometer
