ZENER 8000-V Installation Manual
IM00165
49
Specifications
Input Supply
Voltage
950 to 1100Vac, 3Ø
-15% to +10%
Frequency
48 to 62 Hz
Output
Voltage
0 to 1100Vac, 3Ø The
output voltage cannot
be higher than the
input voltage.
Frequency
Range
0 to 100Hz
Resolution:
0.1%
Linearity:
0.2% of maximum
frequency
Environmental
Enclosure Rating
IP66 Heatsink area
IP00 Front section
inside user’s cabinet
Storage Temperature
-20 to +70ºC
Operating Temperature
0 to 50ºC
Relative Humidity
5 to 95%, Non
Condensing
Altitude
0 to 1000m
Standards Compliance
Models marked with this
symbol comply with the
Australian EMC
Framework requirements
The I2t function complies with IEC 60947-4-1 Ed.
2.0B (2000) and AS/NZS 3947.4.1:2001: Low voltage
switchgear and control gear - Contactors and motor
starters - Electromechanical contactors and motor
starters thermal overload specification class 10A.
Local Controls
Console buttons
Up, Down, Enter,
Escape, Stop/Reset
Terminal Strip Functions
Digital Inputs
+5V and COM
5Vdc Supply
40mA max current
D1 to D4 and EN
Digital Inputs
Logic High 3 to 5Vdc
Logic Low 0 to 2Vdc
Analog Input
Vref and COM
+5Vdc Supply
5mA max current
IN+ and IN Differential
Input 0 to 5V range
0 to 10V range
0 to 20mA range
4 to 20mA range
Common mode range
± 25 Vdc to COM
Relay Outputs
2 Form A Outputs
(single pole normally
open contacts)
Contact Rating
(Resistive load)
5A@250Vac
5A@30Vdc
Contact Rating
(Inductive load)
2A@250Vac
2A@30Vdc
User Parameters
Motor Voltage
900 to 1100V
The output voltage
cannot exceed the
input voltage
Motor Current
25 to 180% of
continuous general
purpose rating
Motor Frequency
30 to 200Hz
Motor Speed
500 to 60 x Motor
Frequency in rpm
Minimum Frequency
0 to 195Hz
Maximum Frequency
5 to 200Hz
Acceleration time
0.5 to 600s
