ZENER 8000-V Installation Manual
IM00165
27
ZENER 8000-V Start Up
i
This manual provides basic control configuration information for the ZENER 8000-V to suit
more common applications. Please refer to the
ZENER 8000-V Reference Manual IM00140
for
a detailed explanation of each control feature, including communications protocols
Connect the input and motor power wiring in accordance with the installation information on pages 11 - 23.
Select the terminal configuration you require. Connect the control wiring according to the appropriate Control
Wiring Diagram or follow a quick setup. The ZENER 8000-V is now ready to run. Before applying power ensure
that rotation of the motor shaft will not cause injury or damage.
After applying power it is recommended that you at least go through the
B00 MOTOR
,
C00 PERFORMANCE
and
G00 INPUT/OUTPUT
menus to set up the ZENER 8000-V before running the motor to prevent any unexpected
motor operation. The ZENER 8000-V is supplied with a link between the EN terminal and the +5V terminal. This
link must always be made for the motor to run.
When the ZENER 8000-V is first powered up, the drive model and version is displayed for approximately 2
seconds. An example of this display is:
V200
Ver 5.2.x
ESC
EXIT
C
FWD
REV
ENTER
STOP
