ZENER 8000-V Installation Manual
_
10
IM00165
Outline of console
Panel Cut-out (92mm x 66mm)
92mm
66m
m
110mm
88m
m
Clearance for CAT-5 connector
Remote console mounting
Panel Cut-out
Ensure space is allowed for the console and the CAT-5
connection as shown. Allow 70mm behind the panel to
accommodate the depth of the remote console.
Cut out the panel as shown in the drawing below.
Installation of Remote Console
The console is secured in position by the rear clamps. Do not over
tighten.
An Earth termination is available if the user would like to earth all
exposed metal components including the front panel. The console
only uses extra low voltage so earthing is not required.
With power removed from the ZENER 8000, connect the CAT-5 cable
supplied to the console & the ZENER Drive.
