![background image](http://html1.mh-extra.com/html/zeiss/visuref-150/visuref-150_user-manual_3337601069.webp)
Operation of the device
000000-2227-967-GA-GB-281021
63
Fig. 35
Display of measurement values of a single measurement with changed illumination
parameters
•
The parameter control panel can also be used in the review screen (if this
function has not been disabled by device settings). Tapping on the panel
(
6
, Fig. 33) in the lower navigation bar will instantaneously display the
measurement values in a different notation or convert them on the basis
of the selected parameters.
–
Depending on the selection of the output unit of keratometry, the user
interface shows the
R1
or
R2
corneal curvature values in mm or the
K1
or
K2
values for corneal refraction in diopters.
•
The measurement is now completed by one of the following actions:
–
Close the measurement by tapping on
Finish
. Further notes on this
–
Discard the measurement by tapping on
Delete
. Further notes on this
–
Return to the measurement screen by tapping on
Measure
.
Summary of Contents for VISUREF 150
