Zeiss VISUREF 150, User Manual

Page: 59 / 134

Operation of the device
000000-2227-967-GA-GB-281021
53

After tapping the parameter control panel ( 4 , Fig. 25), a pop-up
window opens where the desired parameters (Fig. 26) can be set.
The changes in this window are saved immediately. The current
values are shown in blue characters.

By tapping outside of the pop-up window, the window will be
closed.
Fig. 26 Unfolded parameter control panel

If the examination parameters in the parameter control panel are
not to be edited with a single click, this function can be disabled.
To do this, select the Direct control parameter in the
Interface/User/User interaction tabs of the Device settings
menu. Fig. 27 shows the parameter control panel when disabled.
Fig. 27 Disabled parameter control panel
•
Alternatively to the parameter control panel, the examination
parameters can also be set by using the Output/Format/Measurement
data tabs of the Device settings menu.
•
In addition, the measurement parameters Number of measurements
and Sphere shift can be set using the device settings in the
Measurement tab.