manualshive.com logo in svg

YOKOGAWA UTAdvanced UP55A, User Manual

The YOKOGAWA UTAdvanced UP55A is a reliable and advanced temperature controller. With its intuitive interface, it allows for precise temperature regulation in various industrial applications. For detailed Technical Information and complete control over the device, users can download the comprehensive user manual for free from manualshive.com.

Share
Download
background image

xiv

IM 05P02C41-01EN

8.4.1  Switching PID According to Target Setpoint Number (SPNO) .......................... 8-54
8.4.2  Switching PID According to PV ......................................................................... 8-55
8.4.3  Switching PID According to SP ......................................................................... 8-56
8.4.4  Switching PID According to Target SP .............................................................. 8-58
8.4.5  Switching PID According to Deviation (Reference Deviation) ........................... 8-60
8.4.6  Setting Hysteresis at Time of PID Switch ......................................................... 8-61
8.4.7  Switching PID Irrespective of Operation Mode ................................................. 8-61
8.4.8  Switching PID by Contact Input ........................................................................ 8-61

8.5 

Suppressing Overshoot (Super Function) ...................................................................... 8-62

8.6 

Suppressing Hunting (Super2 Function) ........................................................................ 8-64

8.7 

Suppressing Integral Action (Anti-reset Wind-up) .................................................................. 8-66

8.8 

Performing Non-linear PID Control ................................................................................. 8-67

8.9 

Adjusting Auto-tuning Operation 

 .................................................................................... 8-68

8.10  Setting SP Limiter ........................................................................................................... 8-69
8.11  Setting Program Time Unit ............................................................................................. 8-70
8.12  Forcing Local Setpoint (LSP) to Track Program Setpoint or Remote Setpoint (SP Tracking) . 8-71
8.13  Setting Controller Action at Power ON (Restart Mode) ......................................................................8-72
8.14  Setting Time between Powering on Controller and Starting Control (Restart Timer) ..... 8-73

Chapter 9  Program Pattern Functions

9.1 

Setting the Setting Method of Program Pattern ................................................................ 9-1
9.1.1  Setting the Program Pattern Using the Segment Time ....................................... 9-2
9.1.2  Setting the Program Pattern using the Ramp-rate and Segment Time .............. 9-3
9.1.3  Setting the Program Time Unit ............................................................................ 9-5

9.2 

PID Selection Method ....................................................................................................... 9-6
9.2.1  Segment PID Selection ....................................................................................... 9-6
9.2.2  Zone PID Selection ............................................................................................. 9-7
9.2.3  Local PID Selection ............................................................................................ 9-7

9.3 

Setting the Program Starting Conditions (STC) ............................................................... 9-8
9.3.1  Starting operation at starting target setpoint (SSP) (STC=SSP) ........................ 9-8

9.3.2  Ramp-prioritized PV start (STC=RAMP)

 ............................................................. 9-9

9.3.3  Time-prioritized PV start (STC=TIME)

 .............................................................. 9-13

9.3.4  Starting operation at local target setpoint (STC=LSP) ...................................... 9-15
9.3.5  Starting operation at remote setpoint (STC=RSP)............................................ 9-17

9.4 

Setting the Wait Functions ................................................................................................. 9-18
9.4.1  Program Wait at Segment End ......................................................................... 9-18
9.4.2  Program Wait in the Middle of a Segment ........................................................ 9-21

9.5 

Setting the Segment Repetition ..........................................................................................................9-22

9.6 

Operation with Linked Program Patterns ....................................................................... 9-23

9.7 

Setting Event Functions ......................................................................................................................9-26
9.7.1  PV Event ........................................................................................................... 9-27
9.7.2  Time Event ........................................................................................................ 9-28
9.7.3  Local Event ....................................................................................................... 9-30

9.8 

Setting the Operation in Segment Switching ......................................................................................9-31
9.8.1  Switching for continuation (JC=CONT) ............................................................. 9-31
9.8.2  Hold-on switching (JC=HOLD) .......................................................................... 9-33
9.8.3  Local-mode switching (JC=LOCAL) .................................................................. 9-35
9.8.4  Remote-mode switching (JC=REM) ................................................................. 9-37
9.8.5  Segment switching (the controller switches to a local setpoint when  

the segment is completed after release) (JC=W.SL1 to W.SL5)....................... 9-39

9.8.6  Segment switching (the controller switches to a remote setpoint when  

the segment is completed after release) (JC=W.SR1 to W.SR5) ..................... 9-40

Contents

Summary of Contents for UTAdvanced UP55A





































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for UTAdvanced UP55A

ABB 615 Series ANSI Manual preview
615 Series ANSI
Brand: ABB Pages: 60
K&K M8700 Installation Instructions Manual preview
M8700
Brand: K&K Pages: 6
Warren Controls 313 Installation, Operation & Maintenance Instructions Manual preview
313
Brand: Warren Controls Pages: 16
7bit Synapse Instruction Manual preview
Synapse
Brand: 7bit Pages: 2
Jafar 5220 Operation And Maintenance Manual preview
5220
Brand: Jafar Pages: 15
Laars SC6 Installation And Operation Instructions Manual preview
SC6
Brand: Laars Pages: 28
Lamtec BT300 BurnerTronic Quick Reference preview
BT300 BurnerTronic
Brand: Lamtec Pages: 48
Zamel ROW-01 Quick Manual preview
ROW-01
Brand: Zamel Pages: 2
MaintTech CX300 User Manual preview
CX300
Brand: MaintTech Pages: 28
Elo TouchSystems 4 I Series Quick Installation Manual preview
4 I Series
Brand: Elo TouchSystems Pages: 2
Azbil ACTIVAL VY51 5H006 Specifications & Instructions preview
ACTIVAL VY51 5H006
Brand: Azbil Pages: 20
Firmtech FBL770BC Quick Manual preview
FBL770BC
Brand: Firmtech Pages: 19
H3C WX1804H Configuration Manual preview
WX1804H
Brand: H3C Pages: 11
Nanjing Putian Datang Information Electronics Co., Ltd. CL12/2410LI-A User Manual preview
CL12/2410LI-A
Brand: Nanjing Putian Datang Information Electronics Co., Ltd. Pages: 2
DUNIWAY Stockroom Terranova 960 Instruction Manual preview
Terranova 960
Brand: DUNIWAY Stockroom Pages: 30
Lutron Electronics Maestro Wireless Pico Series User Manual preview
Maestro Wireless Pico Series
Brand: Lutron Electronics Pages: 6
Wiznet WIZ6000 Manual preview
WIZ6000
Brand: Wiznet Pages: 27
Mitsubishi A1SJ71LP21GE User Manual preview
A1SJ71LP21GE
Brand: Mitsubishi Pages: 16

Brands by name

Popular brands

Load more brands