manualshive.com logo in svg

YOKOGAWA UTAdvanced UP55A, User Manual

Share
Download
YOKOGAWA UTAdvanced UP55A User Manual Download Page 247

9-26

IM 05P02C41-01EN

9.7 

Setting Event Functions

The event functions allow outputting an alarm at a preset time under the process of 
program operation, or turning on the contact output after a specified time elapses. There 
are two types of event action. One is PV event and the other is time event.
Two types of event action, PV event and time event, can be registered with the program 
operation, and one type of event action, local event, can be registered with the local 
operation.
Up to 8 PV events and up to 16 time events can be set for one program pattern, and up 
to 8 local events can be set for local operation.
The event action for program operation starts at the time when the segment for which the 
event action is set starts.

Summary of Contents for UTAdvanced UP55A





































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands