YOKOGAWA UTAdvanced UP55A, User Manual

Page: 5 / 516

ii
IM 05P02C41-01EN
Target Readers
This guide is intended for the following personnel;
● Engineers responsible for installation, wiring, and maintenance of the equipment.
● Personnel responsible for normal daily operation of the equipment.
Notice
● The contents of this manual are subject to change without notice as a result of
continuing improvements to the instrument’s performance and functions.
● Every effort has been made to ensure accuracy in the preparation of this manual.
Should any errors or omissions come to your attention, however, please inform
Yokogawa Electric’s sales office or sales representative.
● Under no circumstances may the contents of this manual, in part or in whole, be
transcribed or copied without our permission.
Trademarks
● Our product names or brand names mentioned in this manual are the trademarks or
registered trademarks of Yokogawa Electric Corporation (hereinafter referred to as
YOKOGAWA).
● Microsoft, MS-DOS, Windows, Windows XP, Windows Vista, and Windows 7 are
either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
● Adobe, Acrobat, and Postscript are either registered trademarks or trademarks of
Adobe Systems Incorporated.
● Ethernet is a registered trademark of XEROX Corporation in the United States.
● Modbus is a registered trademark of Schneider Electric.
● PROFIBUS-DP is a registered trademark of PROFIBUS User Organization.
● DeviceNet is a registered trademark of Open DeviceNet Vender Association, Inc.
● CC-Link is a registered trademark of CC-Link Partner Association (CLPA.)
● We do not use the TM or ® mark to indicate these trademarks or registered
trademarks in this user’s manual.
● All other product names mentioned in this user’s manual are trademarks or registered
trademarks of their respective companies.
Safety Precautions
This instrument is a product of Installation Category II of IEC/EN/CSA/UL61010-1, IEC/
EN61010-2-201, IEC/EN61010-2-030 Safety Standards and Class A of EN61326-1,
EN55011 (EMC Standards).
CAUTION
This instrument is an EMC class A product. In a domestic environment, this product may
cause radio interference in which case the user needs to take adequate measures.
The instrument is a product rated Measurement Category O (other).
* Measurement Category O (other)
This category applies to electric equipment that measures a circuit connected to a
low-voltage facility and receives power from stationary equipment such as electric
switchboards.
To use the instrument properly and safely, observe the safety precautions described in
this user’s manual when operating it. Use of the instrument in a manner not prescribed
herein may compromise protection features inherent in the device. We assume no liability
for or warranty on a fault caused by users’ failure to observe these instructions.
This instrument is designed to be used within the scope of Measurement Category O
(other) and is dedicated for indoor use.