manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 73

4-51

IM DL350-01EN

One Shot Output Settings (One Shot Out Setup)

A single specified data frame or remote frame is output at the specified time.

Message Format

Select the message format.
STD: Standard format
XTD: Extended format

ID (Hex)

Set the message ID of the output data frame.
Standard format (11 bits): 0x000 to 0x7ff
Extended format (29 bits): 0x00000000 to 0x1fffffff

Frame

Select the frame type.
Remote: Remote frame
Data: Data frame

DLC

Set the byte size of the data area of the data frame.
Selectable range: 0 to 15

Setup

Set the above items and Data (Hex).

•  Data (Hex)

  Configure this setting when the frame type (Frame) is set to Data.
  In hexadecimal notation, specify the data frame value to output.

One Shot Out

Output the data.

  You cannot output the data when in the Port Setup menu, Listen Only is set to ON.

4  Vertical Axis

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands