manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 187

14-3

IM DL350-01EN

Window Layout (Window Layout)

Set the display position of the X-Y window.
•  Side: Horizontal
•  Vertical: Vertical

Pen Marker (Pen Marker)

You can display a pen marker on an X-Y waveform whose display is turned on. It shows the current sampled 
point of the waveform.

Clearing Waveforms at Acquisition Start (Trace clear on Start)

Choose whether to clear the current X-Y waveforms when waveform acquisition is started through the pressing 
of the START/STOP key.
•  ON: X-Y waveforms are cleared.
•  OFF: X-Y waveforms are not cleared.

•  To zoom in or out on an X-Y waveform, change the upper and lower limits (Upper and Lower) of the 

channel that you want to zoom, or change the vertical zoom (V Zoom).

•  On voltage input modules, to change the displayed position of an X-Y waveform, change the positions of 

the channels that it is based on.

14  Displaying X-Y Waveforms

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands