manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 133

8-4

IM DL350-01EN

• MATLAB

•  The sampled data stored in the acquisition memory is saved to a file in MATLAB format. You can select 

whether to include text format information (ON) or not (OFF).

  The extension is .MAT. You can use the file to analyze waveforms on your PC.
•  You cannot load this type of data into the DL350.

Data size

The data sizes indicated below are for when the record length is 100 kpoint and you save the measured data 
from CH1 to CH4 with all computed waveforms turned off and one history waveform.

Data Type

Extension

Size (In bytes)

Binary

.WDF

Approx. 800 k ((100 kpoint) × 4 channels × 2) + internal setup data (200 k to 1 M 

depending on the installation state)

ASCII

.CSV

4

 to 

 5Mpoint

MATLAB

.MAT

Approx. 1.6 M: (100 kpoint) × 4 × 4, 1 byte per bit for logic signals

Saving History Waveforms (History)

Select from the following.
•  One waveform (1 Record): Only the waveform with the record number specified in the history menu is saved.
•  All waveforms (All Record): All history waveforms between the start and end numbers specified in the History 

menu are saved.

*  If the data type is set to MATLAB, the number of history waveforms that can be saved is fixed to one (1 

Record), and options are not displayed.

  Average waveforms of history waveforms cannot be saved. Save the necessary range of history waveforms 

using All Record, load the saved history waveforms, and then set the display mode of the history function to 
Average Record to display the average waveform.

Saving All Displayed Waveforms (Save Trace All)

Saves all the displayed waveforms.

Waveforms to Save (Waveform Save Trace)

•  You can select CH1 to CH6

1

, 16chVOLT

2

, 16chTEMP/VOLT

2

, CAN

3

, LIN

3

, SENT

3

, Math. The selected 

waveforms that are displayed are saved.
1  You can select the channel of an installed module.
2  When a 16-CH voltage input module or 16-CH temperature/voltage input module is installed. You cannot 

select sub channels.

3  On a model with the /VE option when a CAN bus monitor, CAN & LIN bus, or SENT monitor module is 

installed. You cannot select sub channels.

•  The vertical-axis, horizontal-axis, and trigger settings are also saved along with the waveforms.

Save Range (Range)

You can select the waveform save range (area) from one of the choices below.
•  Scope mode

•  Main (Main): Saves the data displayed in the main window
•  Zoom1, Zoom2 (Zoom1, Zoom2): Saves the range of data displayed in the zoom window
•  Cursor range (Cursor Range): Saves the data in the area between the cursors

•  Recorder mode

•  All (All): Saves all the data during the acquisition time
•  Display area (Display Area): Saves the data in the area shown in the waveform display window
•  Zoom (Zoom): Saves the range of data displayed in the zoom window
•  Cursor range (Cursor): Saves the data in the area between the cursors

8  Saving and Loading Data

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands