manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 131

8-2

IM DL350-01EN

Saving Waveform Data (Waveform Save)

You can save the waveform data that the instrument has measured to a file in binary, ASCII, or MATLAB format.

• 

Setting the File Name (FileName Setup)

• 

Waveform Data Save Conditions (Waveform Save Setup)

• 

Detail Setup(Detail)

Setting the File Name (FileName Setup)

File Path (Path)

Displays the specified storage medium for saving data.

Save Destination (File List)

Specify the data save destination.

Auto Naming (Auto Naming)

File names can be automatically assigned.
• OFF
  The auto naming feature is disabled. The name that you specify using the File Name setting is used. If there 

is a file with the same name in the save destination folder, you cannot save the data.

•  Numbering (Numbering)
  The instrument automatically adds a four-digit number from 0000 to 9999 after the common name specified 

using the File Name setting (up to 32 characters) and saves files.

•  Date (Date)
  The file name is the date and time (down to ms) when the file is saved. The file name specified using the File 

Name setting is not used.

•  Whether Auto Naming is set to Numbering, Date, or OFF, when the size of a single file exceeds 2 GB, an 

underscore and a three-digit serial number (000 to 999) are appended to the file names.

20100630_121530_100_000   (2010/06/30 12:15:30.100)

File Name Example for When Auto Naming Is Set to Date

The serial number (from 000 to 999) 

that is appended when the size of a 

single file exceeds 2 GB.

Year

Month

Day

Hour

Minute

Second

ms

•  The underscore and three-digit serial number are not appended to the file name when the file size is 2 GB or 

less. However, when a file is saved through the SD recording feature, an underscore and the three-digit serial 
number 000 are appended to the file name even if the file size does not exceed 2 GB.

•  Save Destination Folder during SD Recording and Action Execution
  In the specified drive, a folder is automatically created with the date (year, month, and day) as its name, and 

data is saved to that folder using file names specified by the auto naming feature. If the number of files in the 
save destination folder exceeds 1000, a new folder is automatically created with the date and an incremented 
sequence number (000 to 999) as its name, and the data continues to be saved in the new folder.

  You can configure the instrument so that data is saved to the specified folder when an action is executed, not 

to the folder that is automatically created with the date. 

8  Saving and Loading Data

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands