manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 225

23-3

IM DL350-01EN

Others (Others)

Language (Language)

Sets the language that is used in the setup menu and messages.

USB Communication (USB Function)

You can specify the communication features that are used when you connect the instrument to a PC through 
USB.
•  TMC: You can use USB TMC (Test and Measurement Class) to control the instrument from a PC. To connect 

the instrument to a PC through the USB port, carry out the following procedure.
  Install YOKOGAWA USB TMC driver on your PC.
  (Do not use USB TMC drivers (or software) supplied by other companies.)

•  Storage: The connected PC can use the instrument as a USB storage device.

  There is no need to install the USB TMC driver into your PC.

•  For information about how to obtain the YOKOGAWA USB TMC driver, contact your nearest YOKOGAWA 

dealer. You can also access the YOKOGAWA USB driver download website and download the driver (http://
www.yokogawa.com/ymi/).

•  When USB Function is set to Storage, only the SD card connected to the instrument can be used as a 

storage device. You cannot access the storage media connected to the USB ports of the instrument.

•  When you access the SD card of the instrument from a PC, only perform read operations. Otherwise, the 

instrument may be damaged.

•  When USB Function is set to Storage and files are being accessed, do not remove the USB cable or turn 

off the instrument. Doing so may damage the instrument.

USB Keyboard Language (USB Keyboard)

Sets the USB keyboard language to English or Japanese. The USB keyboard can be used to enter file names, 
comments, etc.

USB Keyboard Input (USB Key Input)

When using a Japanese USB keyboard, set the input type to Roman (Roman) or Kana (kana).

SD Card Format (SD Card Format)

You can format SD memory cards.

  When you format an SD memory card, all the data saved in the card will be erased.

Additional Option License (Option Installation)

On the instrument’s with firmware version 1.10 and later, you can add the following options after purchasing the 
instrument. Install the options after you have purchased the license keys for them.

  Options That Can Be Added

/VE

Vehicle edition

  The SUFFIX (suffix code) inscribed in the name plate on the instrument case indicates the installed options 

at the time of factory shipment. After you add options through additional option licenses, check the options on 
the instrument overview screen.

23  Other Features

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands