manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 198

16-3

IM DL350-01EN

External Start (Remote)

You can perform GO/NO-GO determination and output the results in sync with an external signal applied to the 
GO/NO-GO I/O terminal of the instrument.
•  OFF: GO/NO-GO determination is not performed through the use of an external signal.
•  ON: GO/NO-GO determination is performed through the use of an external signal.

Action (Action)

Editing a Waveform Zone (Edit Zone)

Number of the Waveform Zone to Edit

Select the number of the waveform zone you want to edit from the range indicated below. If a zone has already 
been created for that number, the zone will be displayed. If no zone has been created for a number, select a 
base waveform from the base waveform editing menu (New), and then edit the zone.
Zone 1 to Zone 6 (Zone1 to Zone6)

Editing the Source Waveform Zone (Zone Edit)

Editing a Base Waveform (New)

When you create a new waveform zone, you need to select the waveform that you will base it on (the base 
waveform). Select a waveform whose display is on.
CH1 to CH4

1

, Math1 to Math2

1  You can select the channel of an installed module. On a 4-CH module, select sub channel 1 or 2. However, 

you cannot select the channel of a logic module, 16-CH voltage input, 16-CH temperature/voltage input, CAN 
bus monitor, CAN & LIN bus monitor, or SENT monitor module.

Specifying the Editing Range

Select the part of the base waveform that you want to edit.
•  Whole (Whole): The whole waveform is within the editing range.
•  Part (Part): A portion of the waveform is within the editing range.

Whole

Part

Editing range 

boundary 1 

(Time Range1)

Editing range 

boundary 2 

(Time Range2)

Zone Settings

When Edit is set to Whole, you can set the upper, lower, left, and right boundaries of the waveform zone. When 
Edit is set to Part, you can set the upper and lower boundaries of the zone.
•  Upper and Lower Limits (Upper/Lower)
  Selectable range: ±10 div vertically from the base waveform
  When Edit is set to Part, you can set the upper and lower boundaries of the area between Time Range1 and 

Time Range2.

•  Left and right sides (Left and Right): These settings can be configured only when Edit is set to Whole.
  Selectable range: ±5 div from the center of the screen
•  Time range 1 and time range 2 (Time Range1 and Time Range2): These settings can be configured only 

when Edit is set to Part.

  Selectable range: ±5 div on the time axis

16  GO/NO-GO Determination (Scope mode only)

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands