manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 34

4-12

IM DL350-01EN

Zoom Method (V Scale)

This is a setting in scope mode. You can choose the method for zooming the waveform vertically.
•  DIV: The waveform is zoomed by a set magnification. Set the following items.

• 

Waveform Vertical Position (Position)

• 

Zooming by Setting a Magnification (V Zoom)

•  SPAN: The waveform is zoomed to fit within specified 

upper and lower display limits

.

In recorder mode, V Scale is set with SPAN.

Waveform Vertical Position (Position)

This is a setting in scope mode.
If V Scale is set to DIV, set the waveform vertical position. The instrument can display the waveforms of the main 
analog-input channels, the waveforms of the sub analog-input channels, and computed waveforms. Because the 
instrument can display so many waveforms, the waveforms may overlap and be difficult to view. If this happens, 
you can adjust the vertical display position to make waveforms easier to view (vertical position).
The vertical position can be moved within the range of ±5 div.
When you change the vertical scale (V/div), the location of the vertical position mark does not change.
Set the vertical position for each channel and sub channel.
On a 720254 4-CH module, select the sub channel.
To change the position of a sub channel on a 720220 or 720221 16-CH module, select CH1 or CH3, select the 
sub channel, and set the vertical position.

Position: 3 div

Position: –3 div

Position:0 div

Vertical position 

mark

•  You cannot use the vertical position setting to move the vertical position of a temperature, strain, or 

computed waveform.

•  When you change the vertical position (when V Scale is set to DIV) or the upper or lower limit ((when 

V Scale is set to SPAN)), data that is outside of the measurement range is handled as overflow data. 
Overflow data will appear as a clipped waveform as shown below.

4  Vertical Axis

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands