manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 178

13-2

IM DL350-01EN

Unit (Unit)

Vertical Scale (Vert. Scale)

You can select the method for setting the vertical scale from the following options.
•  Auto: The center and scale of the vertical axis are set automatically.
•  Manual: The center and scale of the vertical axis must be set manually.

Center/Scale (Center/Sens.)

When Vert. Scale Mode is set to Manual, set the center and scale of the vertical axis.

Horizontal Zoom (Horiz. Scale)

Select one of the following horizontal display ranges.
•  Auto: The horizontal center point and span are set automatically (the entire range is displayed).
•  Left/Right: You must set the left and right ends of the display range manually.
•  Center/Span: You must set the horizontal center point and span manually. You can select this only when the 

horizontal scale

 is set to Hz.

Horizontal Range (Left/Right, Center/Span)

Horizontal Range (Left/Right)

When the horizontal zoom is set to Left/Right, set the left and right ends of the horizontal display range.
Selectable range: 0.00 kHz to the maximum frequency

Horizontal Range (Center/Span)

When the horizontal zoom is set to Center/Span, set the center point and span of the horizontal display range.
Selectable range of the center: 0.00 kHz to the maximum frequency
Selectable range of the span: the frequency resolution x10 to the maximum frequency

Horizontal Scale (Axis)

Select one of the following horizontal scale types.
•  Hz: A normal (linear) scale is used.
•  Log Hz: A logarithmic scale is used.

Start Point (Start Point)

Set the computation start point.
Selectable range: –5 div to +5 div
•  Scope mode: Set the positions in divisions.
•  Recorder mode: Set the positions in terms of the time (ddhhmmss) corresponding to divisions.
The start and end points are similar to the settable range of the cursor display position in cursor measurement.
For details, see “Selectable Range of Cursor Positions.”

13   FFT

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands