YOKOGAWA PZ4000 User Manual Download Page 289

Page: 289 / 417

12-29

IM 253710-01E

Saving and Loading the Data

Selecting the medium and directory

The procedures are the same as “Selecting the source medium” and “Selecting
the source directory” in section 12.5.

Changing the file attribute

Turn the jog shuttle to select a file

Press the [Attribute] soft key. The attribute of the selected file changes to [R] or
[R/W].

Selecting the file to be deleted one at a time

Turn the jog shuttle to select a file.

Press the [Set/Reset] soft key. If an [

∗

] mark is displayed to the left of the file

name in the File List dialog box, the file will be deleted. If the [

∗

] is not

displayed, the file will not be deleted.

Go to step 11.

12.8 Changing the File Attribute, Deleting Files

Summary of Contents for PZ4000


































































































































































































































































































































































































































Search results

Summary of Contents for PZ4000

Reviews:

Related manuals for PZ4000

Brands by name

Popular brands

YOKOGAWA PZ4000, User Manual

Search results

Summary of Contents for PZ4000

Reviews:

Related manuals for PZ4000

Brands by name

Popular brands