11-1
IM 253710-01E
Waveform Analysis
11
Chapter 11 Waveform Analysis
11.1 Setting the Computation Region, Re-
computing
Keys
• The
mark indicates the keys that are used for the operation.
• To exit the menu during operation, press the ESC key.
CONFIGURATION
ELEMENTS
VOLTAGE
CURRENT
FILTER
1
FILTER
FILTER
FILTER
2
3
4
RES
ET SELECT
CH
8
CH
6
CH
4
CH
2
CH
7
CH
5
CH
3
CH
1
OBSERVATION TIME
TRIG’ D
ACQ
REMOTE
MENU
SHIFT
NULL
CAL
COPY
LOCAL
HELP
MISC
FILE
ZOOM
CURSOR
MATH
DISPLAY
SETUP INPUT MEASURE TRIGGER
ABORT
E S C
SINGLE
START
START/STOP
Procedure
Select a display format to display the waveforms. For the procedures, see
section 9.1, “Selecting the Channel to Display.”
1.
Press the DISPLAY key to display the Display setting menu.
2.
Press the [Format] soft key to display the display format selection box.
Check that [Format] is set to [Wave], [Wave], [Wave+Bar], or
[Wave+X-Y]
*
.
*
X-Y waveform display is applicable to products (PZ4000) with firmware version 2.01 or
later.
The following procedures are given with the premise that the display format is
set to [Wave].
Setting the computation region
3.
Press the MATH key to display the Math setting menu.
4.
Press the [Mode] soft key to select [ON].