12-36
IM 253710-01E
Explanation
CAUTION
Never remove the medium (disk) or turn OFF the power while the access
indicator or the
mark is blinking. It can damage the medium or destroy the
data on the medium.
Selecting the medium and directory of the copy source and copy destination
See the explanation given in “Selecting the medium and directory” in section 12.5.
Selecting the file attribute
See the explanation given in “Selecting the file attribute” in section 12.8.
Selecting the copy source files
You can copy all files that have a [
∗
] mark to the left of the file name. There are two
methods available to select the files that are to be copied.
• Selecting the file one at a time
Place [
∗
] marks to the left of the file names one at a time, using the [Set/Reset] soft
key.
• Selecting all files at once
Place [
∗
] marks to the left of the file names all at once, using the [All Set] soft key.
There are three methods to place the marks all at once.
• Selecting a file and pressing the [All Set] soft key places [
∗
] marks on the
directory containing the selected file and all files in that directory.
• Selecting a directory and pressing the [All Set] soft key places [
∗
] marks on the
selected directory and all files in that directory.
• Selecting a medium and pressing the [All Set] soft key places [
∗
] marks on all
the directories and files on the selected medium.
Specifying the file to be displayed in the File List dialog box
See the explanation given in “Specifying the file to be displayed in the File List dialog
box” in section 12.8.
Properties
See the explanation given in “Properties” in section 12.5.
Note
•
You cannot copy files while the data acquisition is in progress (START/STOP indicator is
ON).
•
If an error occurs while copying multiple files, the files after the error will not be copied.
•
Directory attributes cannot be changed.
•
If a file with the same name exists at the destination, copying is not allowed.
•
You cannot copy the same files to another directory immediately after copying those files.
You must again select the files you wish to copy.
•
When [File Item] is [Wave], [Data Type] is [Binary], and [Filter] is [Item], copying a file with a
.WVF extension that has a [
∗
] mark causes the file with the same name with the .HDR
extension to be copied. When [Filter] is [All], only the files that have the [
∗
] marks are copied.
12.9 Copying Files
