4-1
IM 253710-01E
Common Operations
4
Chapter 4 Common Operations
4.1
Entering Values and Strings
Entering Values
By using the rotary knob
The observation time can be set regardless of the displayed menu.
OBSERVATION TIME
ABORT
SINGLE
START
START/STOP
By using the jog shuttle
After selecting the setup parameter with the soft keys and the SELECT key, the value
can be changed using the jog shuttle. The outer shuttle ring can be used step
through the values in large increments. On some parameters, the arrow keys below
the jog shuttle can be used to move among the digits.
Note
The parameters that can be changed using the jog shuttle are reset to their initial values
when the RESET key is pressed.
Entering Strings
The date/time, file name, and comment can be entered using the keyboard that is
displayed on the screen. The jog shuttle, SELECT key, and arrow keys are used to
operate the keyboard to enter the character strings. The keyboard that is displayed
when creating equations for user-defined functions and waveform computations contain
special keys. See the “Note” on the next page.
Operating the keyboard
1.
Turn the jog shuttle to select the character to be entered.
2.
Pressing the SELECT key enters the character in the entry area.
If there are strings already in the entry area as with the date and time, use the
arrow keys to select the entry position.
3.
Repeat steps 1 and 2 to enter all the characters.
4.
After entering all the characters, select [ENT] on the keyboard and press the
SELECT key. The string is confirmed and the keyboard disappears.
Entry box
INSERT indicator
