manualshive.com logo in svg

YOKOGAWA GS200, User Manual, Page: 54 / 186

Share
Download
YOKOGAWA GS200 User Manual Download Page 54

3.3  Connecting the Power Supply

Before Connecting the Power Supply

To prevent electric shock and damage to the instrument, follow the warnings below.

 

WARNING

•  Before connecting the power cord, ensure that the source voltage matches the 

rated supply voltage of the instrument and that it is within the maximum rated 
voltage of the provided power cord.

•  Connect the power cord after checking that the power switch of the instrument is 

turned OFF.

•  To prevent electric shock or fire, be sure to use the power cord for the instrument 

that is supplied by YOKOGAWA.

•  Make sure to connect protective earth grounding to prevent electric shock.

 

Connect the power cord to a three-prong power outlet with a protective earth 
terminal.

•  Do not use an extension cord without protective earth ground.

 

The protective 

features of the instrument will be rendered ineffective.

•  Use an AC outlet that complies with the power cord provided and securely 

connect the protective grounding. If such an AC outlet is unavailable and 
protective grounding cannot be furnished, do not use the instrument.

Connecting the Power Cord

1.

  Check that the instrument’s power switch is off.

2.

  Connect the instrument’s power cord to the power inlet on the rear panel.

3.

  Connect the other end of the cord to an outlet that meets the conditions below. 

The AC outlet must be of a three-prong type with a protective earth ground 
terminal.

Item 

Specifications

Suffix Code 

-1 

-4 

-7

Rated power supply voltage 

100 VAC 

120 VAC 

230 VAC

Permitted power supply voltage range  90 VAC to 110 VAC 

108 VAC to 132 VAC 

207 VAC to 253 VAC 

Rated power supply frequency 

50/60 Hz

Permitted power supply  

48 Hz to 63 Hz 

frequency range
Maximum power  consumption 

Approx. 80 VA

*  The supply voltage that the GS200 can use differs depending on its suffix code. Before you use the 

instrument, check that the voltage supplied to it is less than or equal to the maximum rated voltage of 

the power cord provided with it (see page iii for the maximum voltage rating).

 

 

     

Three-prong outlet

Power cord

(standard accessory)

3-6

IM GS210-01EN

Summary of Contents for GS200



























































































































































































Reviews:

No comments