manualshive.com logo in svg

YOKOGAWA GS200, User Manual, Page: 106 / 186

Share
Download
YOKOGAWA GS200 User Manual Download Page 106

9.4  Selecting the Display Brightness, Turning the 

Display Off, and Turning the Beep Sound On 

and Off

Procedure

1.

  Press 

UTILITY

 to display the following menu.

 

 

     

2.

  Press the 

Sys Config

 soft key to display the following menu.

 

 

     

Selecting the Display Brightness

3.

  Press the 

Display

 soft key to display the following menu.

 

 

     

4.

  Press a soft key from 

1

 to 

4

 to set the display brightness.

Turning the Display Off

4.

  Press the 

Turn Off

 soft key to turn the display off. The NUM LOCK key blinks until 

you turn the display on again. To turn the display on, press any key.

Turning the Beep Sound On and Off

3.

  Press the 

Beep

 soft key to select On or Off.

Explanation

Selecting the Display Brightness

You can set the display brightness to a level from 1 to 4. The darkest setting is 1, and the 
brightest setting is 4.

Turning the Display Off

Turning the display off extends the life of the display and suppresses the noise that the 
display generates.

Turning the Beep Sound On and Off

If you turn the beep sound on, the GS200 generates beep sounds during operation, such 
as when an error occurs.

<<Corresponding Command Mnemonic>>

:SYSTem:DISPlay:BRIGht <

integer

>|MINimum|MAXimum|UP|DOWN

:SYSTem:DISPlay[:STATe] 1|0|ON|OFF
:SYSTem:BEEPer 1|0|ON|OFF

9-5

IM GS210-01EN

Other Features

3

2

1

4

5

6

7

8

9

10

11 

12

13

14

15

App

Index

Summary of Contents for GS200



























































































































































































Reviews:

No comments