manualshive.com logo in svg

YOKOGAWA GS200, User Manual, Page: 117 / 186

Share
Download
YOKOGAWA GS200 User Manual Download Page 117

11-6

IM GS210-01EN

11.4  Viewing the Network Settings

Procedure

1.

  Press 

UTILITY

 to display the following menu.

 

 

     

2.

  Press the 

Remot I/F

 soft key to display the following menu.

 

 

     

3.

  Press the 

LAN

 soft key to display the LAN menu.

 

 

     

Viewing the Network Settings

4.

  Press the 

Over-view

 soft key to display the currently active network settings. Any 

changes that you have made to these settings are not displayed until you restart 
the GS200.

 

 

     

Explanation

You can view the following network settings.
•  MAC address
  The MAC address is a unique 48-bit address assigned to the GS200.
•  IP address (see section 11.3)
•  Subnet mask (see section 11.3)
•  Default gateway (see section 11.3)

Note

If DHCP is enabled, “0.0.0.0” will be displayed for the IP address, subnet mask, and default 
gateway until an address is assigned to the GS200. If the display does not change even after 
30 seconds elapses after the GS200 is turned on, the DHCP address assignment may have 
failed. If this happens, check that the Ethernet cable is connected correctly and that the LINK 
indicator of the 100BASE-TX port on the rear panel is illuminated, and then restart the GS200.

Summary of Contents for GS200



























































































































































































Reviews:

No comments