manualshive.com logo in svg

YOKOGAWA GS200, User Manual, Page: 105 / 186

Share
Download
YOKOGAWA GS200 User Manual Download Page 105

9.3  Selecting the Settings Applied at Power-On

Procedure

Selecting the Settings Applied at Power-On

1.

  Press 

SETUP

 to display the following menu.

 

 

     

2.

  Press the   soft key to move the cursor (underline) up and down and select the 

setup file that you want to load the settings from when the GS200 turns on.

 

 

     

3.

  Press the 

Set to PwrOn

 soft key.

An asterisk is displayed to the left of the setup file that you selected.

 

 

     

Clearing the Settings Applied at Power-On

2.

  Press the   soft key to move the cursor (underline) up and down and select the 

setup file that has an asterisk displayed to the left of its file name.

 

 

     

3.

  Press the 

Clear PwrOn

 soft key.

The asterisk disappears.

 

 

     

Explanation

If you select the settings applied at power-on, the selected setup file is loaded 
automatically when the GS200 turns on. If you clear the settings applied at power-on, the 
factory default settings are loaded each time that the GS200 turns on. For information on 
the factory default settings, see appendix 1, “Factory Default Settings.”

<<Corresponding Command Mnemonic>>

:SYSTem:SETup:PON 

<character string>

9-4

IM GS210-01EN

Summary of Contents for GS200



























































































































































































Reviews:

No comments