manualshive.com logo in svg

YOKOGAWA GS200, User Manual, Page: 170 / 186

Share
Download
YOKOGAWA GS200 User Manual Download Page 170

3

2

1

4

5

6

7

8

9

10

11 

12

13

14

15

App

Index

14.5  Updating the System Firmware

Procedure

Obtaining the Update File

1.

  Download the most recent system file from the GS200 webpage (http://tmi.

yokogawa.com/products/generators-sources/) to your PC.

2.

  Use a USB cable to connect the PC and the GS200.

3.

  Copy the system file to the volatile disk (GS200RAM).

Updating the System Firmware

1.

  Press 

UTILITY

 to display the following menu.

 

 

     

2.

  Press the 

Sys Config

 soft key to display the following menu.

 

 

     

3.

  Press the 

Update Sys

 soft key.

 The system file automatically opens, and the update operation is carried out.
 An error will occur if the GS200RAM disk does not contain a system file.

4.

  When the GS200 finishes updating its firmware, it restarts.

Note

•  It takes some time to copy the system file to the volatile disk (GS200RAM). Carry out the 

procedure below to check that the file copy operation is complete before you update the 
firmware.

  Double-click the Safely Remove Hardware icon in the notification area on the Windows 

desktop.

  In the window that opens, click 

USB Mass Storage Device

, and then click 

Stop

. In the Stop 

a Hardware device dialog box that opens, confirm the information, and click 

OK

. If the copy 

operation has been completed, the “Safe to Remove Hardware” message will appear.

•  After you press the Update Sys soft key, do not turn the GS200 off until the system file has 

been completely overwritten. Doing so may damage the instrument.

•  When you update the system firmware, all the data files stored on the GS200RAM are 

cleared. Move any data files that you want to keep to a PC before you update the system 
firmware.

14-9

IM GS210-01EN

Troubleshooting and Maintenance

Summary of Contents for GS200



























































































































































































Reviews:

No comments