manualshive.com logo in svg

YOKOGAWA GS200, User Manual, Page: 112 / 186

Share
Download
YOKOGAWA GS200 User Manual Download Page 112

11-1

IM GS210-01EN

Ethernet Interface (Option)

11.1  Ethernet Interface Features and Specifications

Ethernet Interface Features

VXI-11 Server Feature

The VXI-11 server feature is a command mnemonic stream parsing server based on the 
VXI-11 protocol that allows up to five clients to connect to it on port 111.

Command Control Server Feature

The command control server feature is a command mnemonic stream parsing server that 
allows up to five clients to connect to it on port 7655.
The terminator (CR, LF, or CR+LF) can be specified.

FTP Server Feature

The FTP server feature is an anonymous FTP server that allows up to five clients to 
connect to it on port 21.

HTTP Server Feature

 The HTTP server feature (connected to on port 80) enables you to use a Web browser to 
display various GS200 information and control the GS200 remotely.

Ethernet Interface Specifications

Connector: 

 

 

RJ-45

Number of ports: 

 

 

1

Electrical and mechanical specifications:  Conforms to IEEE 802.3
Transmission system: 

 

 

100BASE-TX/10BASE-T

Maximum data rate: 

 

 

100 Mbps

Protocol: 

 

 

TCP/IP

Chapter 11  Ethernet Interface (Option)

3

2

1

4

5

6

7

8

9

10

11 

12

13

14

15

App

Index

Summary of Contents for GS200



























































































































































































Reviews:

No comments