3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
App
Index
14.2 Error Code Descriptions and Corrective
Actions
The following two types of messages can appear in the center of the display or the error
log view.
• Error messages (Error)
Error messages are displayed when an inappropriate operation is carried out.
• Confirmation messages
Confirmation messages are not entered in the error queue, but they are displayed in
the error log.
Syntax Errors (–100 to –199)
Error No.
Error Message
Corrective Action
Page
–100
Command error
Check whether the command string is incorrect.
—
–101
Invalid_character
Check whether invalid characters such as $ or & are —
used in the command header or parameters.
–102
Syntax_error
Check that the syntax is correct.
—
–103
Invalid separator
Check the use of the separator (comma).
—
–106
Parameter not allowed
Check the command and the number of parameters.
—
–107
Missing parameter
Check the command and the number of parameters.
—
–113
Undefined header
Check the command mnemonic.
—
–121
Invalid character in number
Check that the notation of the numeric parameter is
13-5
correct (for example, binary notation should not contain
characters other than 0 and 1).
–123
Exponent too large
Check whether the exponent is within the range of
—
–127 to 127.
–128
Numeric data not allowed
Check the parameter format.
—
–131
Invalid suffix
Check the unit that can be used for the parameter.
—
–138
Suffix not allowed
Check the parameter format.
—
–141
Invalid character data
Check the character data that can be used for the
—
parameter.
–148
Character data not allowed
Check the command and parameter format.
—
–150
String data error
Check that all strings have closing quotation marks
—
(“ or ’).
–151
Invalid string data
Check that string parameters are in the correct format. —
–158
String data not allowed
Check the command and parameter format.
—
–160
Block data error
Check that block data is correct.
—
–161
Invalid block data
Check that block data is in the correct format.
—
–168
Block data not allowed
Check the command and parameter format.
—
–170
Expression error
Check the command and parameter format.
—
–178
Expression data not allowed
Check the command and parameter format.
—
14-3
IM GS210-01EN
Troubleshooting and Maintenance