2-21
IM 701450-51E
CAN Bus Signal Analysis Function
2
Executing/Aborting the Analysis
13.
Press the
Analyze Exec
soft key. The data analysis is executed. The words
Analyze Exec change to Analyze Abort.
To abort the data analysis, press the
Analyze Abort
soft key. The data analysis
is aborted, and the words Analyze Abort change to Analyze Exec.
If indefinite data exists in the analysis data, “
∗
” is attached to the corresponding
analysis data.
Data field value
(hexadecimal)
Analysis result list display
If Acknowledge is returned Y is displayed;
otherwise nothing is displayed.
Analysis
number
Identifier value
(hexadecimal)
Displaying the Analysis Data
Scrolling the List
14.
Press the
List
soft key.
15.
Turn the
jog shuttle
to scroll the list left and right.
Up to 18 analysis data points are displayed at once in the order of occurrence.
By scrolling the list left and right using the
jog shuttle
, analysis data up to 18
data points can be displayed at a time.
Setting the display position of the head of the frame (firmware version 2.40 or later)
16.
Press the
List/Position
soft key to set the jog shuttle control to Position.
17.
Turn the
jog shuttle
to set the display position of the head of the frame in the
range of 0 to 50%.
The left edge and the center of the waveform display area are 0% and 50%, respectively.
Setting the Zoom Ratio
18.
Press the
Z1 Mag/Z1 Position
soft key to set the jog shuttle control to Z1 Mag.
19.
Turn the
jog shuttle
to set the zoom ratio.
Setting the Zoom Position
20.
Press the
Z1 Mag/Z1 Position
soft key to set the jog shuttle control to Z1 Position.
21.
Turn the
jog shuttle
to set the zoom position. When the center of the zoom box
moves to the waveform corresponding to the analysis data on the list, the
corresponding analysis data on the list is highlighted.
2.5 Analyzing/Searching Data
