1-8
IM 701450-51E
When I
2
C On Pattern Is Selected
24.
Press the Set Pattern soft key. The Set Pattern dialog box displays the
assignment conditions of the I
2
C Bus signal of CH1 and CH2 and the setup
screen for the patterns of CH3 to CH8 (CH3 and CH4 on the DL7440).
25.
Use jog shuttle & SELECT to set the patterns of CH3 to CH8 (CH3 and CH4
on the DL7440) using H (high), L (low), and X.
26.
Use jog shuttle & SELECT to set the pattern condition to True or False
(Condition box).
Select the CH3 to CH8 pattern
using H, L, and X.
Set the pattern condition to
True or False.
27.
Press ESC. The Set Pattern dialog box closes.
Proceed to step 29.
When I
2
C -> Pattern Is Selected
24.
Press the Set Pattern soft key. The Set Pattern dialog box displays the
assignment conditions of the I
2
C Bus signal of CH1 and CH2 and the setup
screen for the patterns of CH3 to CH8 (CH3 and CH4 on the DL7440).
25.
Use jog shuttle & SELECT to set the clock channel to None or any of the
channels from CH3 to CH8 (CH3 and CH4 on the DL7440) (Clock CH box).
26.
Use jog shuttle & SELECT to set the patterns of CH3 to CH8 (CH3 and CH4
on the DL7440) using H (high), L (low), and X. For the channel set as the clock
channel in step 25, set the slope to (rising edge) or (falling edge).
27.
If you set the clock channel to None in step 25, use jog shuttle & SELECT to
set the pattern condition to Enter or Exit (Condition box).
Select the CH3 to CH8
pattern* using H, L, and X.
Set the pattern condition to
Enter or Exit.
Select the clock channel
from CH3 to CH8.
When Clock CH is set to None
When Clock CH is set to any channel
from CH3 to CH8
* Set the slope of the channel selected for the clock channel to or .
28.
Press ESC. The Set Pattern dialog box closes.
Proceed to step 29.
1.4 Setting the I
2
C Bus Signal Acquisition Conditions
