YOKOGAWA DL7480 User Manual Download Page 42

Page: 42 / 176

1-37

IM 701450-51E

C Bus Signal Analysis Function

1.7

Error Messages

A message may appear during operation. This section describes the meanings of the

messages and their corrective actions. This section lists only the error messages related

to the I

C Bus signal analysis function. There are other error messages related to the

DL7440/DL7480 and communications. These messages are described in the

DL7440/

DL7480 User’s Manual (IM701450-01E) and the DL7440/DL7480 Communication

Interface User’s Manual (IM701450-17E).

You can set the messages to be displayed in English or Japanese. For the procedure of

setting the message language, see section 15.1, “Changing the Message Language and

Turning ON/OFF the Click Sound” in the

DL7440/DL7480 User’s Manual (IM701450-

01E).

If the corrective action requires servicing, contact your nearest YOKOGAWA dealer for

repairs.

Code

Message

Action

Page

Aborted the analysis.

–

1-27

Data not detected.

–

1-4, 1-10,

Execute again after changing the settings or

1-25, 1-30

reacquiring the waveform.

730

Pattern is not specified.

Enable Address Pattern or Data Pattern in the

1-29

Search Setup dialog box.

739

Analyzed data does not exist.

Execute the analysis.

1-27, 1-31

Execute the analysis.

870

Cannot be specified.

Increase the number of valid bytes.

1-6, 1-11

Invalid byte or bit.

Summary of Contents for DL7480

















































































































































































Search results

Summary of Contents for DL7480

Reviews:

Related manuals for DL7480

Brands by name

Popular brands

YOKOGAWA DL7480, User Manual

Search results

Summary of Contents for DL7480

Reviews:

Related manuals for DL7480

Brands by name

Popular brands