YOKOGAWA DL7480, User Manual

Page: 109 / 176

2-54
IM 701450-51E
PFORmat <Space> BINar y
HEXa
?
RTR <Space> OFF
ON
<NRf>
?
SPOint <Space> <NRf>
?
VDIFf <Space> L_H
H_L
?
?
RISE
FALL
?
CLOCk <Space> NONE
<NRf>
?
CONDition <Space> ENTer
EXIT
TRUE
FALSe
?
?
PA TTern : CHANnel <x> <Space> HIGH
LOW
DONTcare
;
TYPE <Space>
CANBus
?
PATTERN8 “XXXXXXXX”;
CONDITION TRUE;:TRIGGER:CAN:
EFRAME 0
:TRIGger:CAN:BRATe
Function Sets the bit rate (data transfer rate) in the
trigger conditions or queries the current setting.
Syntax :TRIGger:CAN:BRATe {<NRf>}
:TRIGger:CAN:BRATe?
<NRf>=10000 to 1000000 (except, the
resolution is the reciprocal of 0.5
µ
s)
Example :TRIGGER:CAN:BRATE 500000
:TRIGGER:CAN:BRATE? ->
:TRIGGER:CAN:BRATE 500.0E+03
:TRIGger:CAN:COMBination
Function Sets the combination trigger or queries the
current setting.
Syntax :TRIGger:CAN:COMBination
{ONLY|ONPattern|APATtern}
:TRIGger:CAN:COMBination?
Example :TRIGGER:CAN:COMBINATION ONLY
:TRIGGER:CAN:COMBINATION?
-> :TRIGGER:CAN:COMBINATION ONLY
2.9 Communication Commands
:TRIGger:CAN?
Function Queries all settings related to the trigger
function.
Syntax :TRIGger:CAN?
Example :TRIGGER:CAN? -> :TRIGGER:CAN:
BRATE 500.0E+03;COMBINATION ONLY;
SPOINT 62.5;MFORMAT STANDARD;
VDIFF L_H;PFORMAT HEXA;IDENTIFIER:
MODE 0;CONDITION TRUE;ID1:MODE 0;
PATTERN “XXXXXXXXXXX”;:TRIGGER:CAN:
IDENTIFIER:ID2:MODE 0;
PATTERN “XXXXXXXXXXX”;:TRIGGER:CAN:
IDENTIFIER:ID3:MODE 0;
PATTERN “XXXXXXXXXXX”;:TRIGGER:CAN:
IDENTIFIER:ID4:MODE 0;
PATTERN “XXXXXXXXXXX”;:TRIGGER:CAN:
RTR 0;DATA:MODE 0;DLC 8;
PATTERN1 “XXXXXXXX”;
PATTERN2 “XXXXXXXX”;
PATTERN3 “XXXXXXXX”;
PATTERN4 “XXXXXXXX”;
PATTERN5 “XXXXXXXX”;
PATTERN6 “XXXXXXXX”;
PATTERN7 “XXXXXXXX”;