7-13
IM CW120-E
Making Settings
7
(2) Using the
keys, select the desired interval. The displayed
interval time changes sequentially as follows.
(30 min)
(15 min)
(1 hr)
(1 sec)
(2 sec)
(5 sec)
(10 sec)
(15 sec)
(30 sec)
(1 min)
(2 min)
(5 min)
(10 min)
or
or
(3) After selecting the desired interval, press the
key. The interval is
changed accordingly and the setting item selection screen returns.
To cancel the change, press the
key. The setting item selection screen
also returns.
NOTE
When setting the output interval to 2 minutes or less, note the following.
• Depending on the number of files residing in the PC card and the free space in it, the data at
the beginning may not be saved (for example, after approximately fifty-thousand samples have
been saved at one-second intervals). If this occurs,
appears on the screen and data
saving is stopped.
• Especially when setting the interval to 1 second, make sure that:
There is no file in the PC card (format the PC card to delete all files).
The PC card is inserted when starting the integration.
Do not remove the PC card during electric energy measurement.
Do not activate communication.
Do not perform excessive key actions.
Only if data saving to the PC card is enabled (see Section 7.2.10), data is saved to the PC card at
the specified interval.
7.2 Setting Each Item
