7-3
IM CW120-E
Making Settings
7
●
Setting Procedure
(1) Press the
key. The display changes from the measurement screen
to the screen for setting (the setting item selection screen) and the
sign appears in the lower left.
DISP
ENTER
MEAS/SET
ESC
MEAS/SET key
UP/DOWN/LEFT/RIGHT keys
ENTER key
Device number setting screen
ESC key
(2) Using the
keys, select the desired item, and then press the
key. Each time one of the
keys is pressed, the setting
item changes sequentially as follows.
or
or
To cancel a setting after pressing the
key, press the
key. The
setting item selection screen then returns.
(3) After making necessary changes to the settings, press the
key to
return to the measurement screen.
TIP
• The MEM (backup memory setting) is skipped if no data exists in the backup memory (and the MEM
mark is not lit on the measurement screen).
• The DEV (communication device) setting is skipped if your CW120/121 model has an RS-485 inter-
face.
• The setting item that is selected by default when the screen changes from the measurement screen,
is the item selected last time the measurement screen was returned from a setting screen.
• In the electric energy measurement mode, the settings can be viewed only for checking and cannot
be modified.
7.1 Setting Items and Item Selection
