manualshive.com logo in svg

YOKOGAWA CW120, User Manual

The YOKOGAWA CW120 is a versatile and highly reliable device designed for precise electrical measurement. To ensure optimal usage, a comprehensive User Manual is available for free download from manualshive.com. This manual provides detailed instructions and valuable insights to enhance your experience with the CW120, guaranteeing accurate results each time.

Share
Download
background image

2-8

IM CW120-E

●

 Indications of Setting Items

Mark appearing during setting mode: 

Setting Item

Displayed Mark

1.

Device number

2.

Loading and saving of settings

3.

Deletion of measured-data file and formatting of PC card

4.

Clearance of electric energy count (watt-hours) and resetting of system

5.

Copying and clearance of backup memory

6.

Date

7.

Output interval

8.

Integration start date and time

9.

Integration stop date and time

10. Whether to save data to PC card
11. Selection of communication device
12. Communication settings
13. VT ratio setting
14. CT ratio setting
15. Probe selection
16. Decimal position and unit selections for electric energy (watt-hours)

●

 Indications during Measurement

Displayed Mark

Lights when integration is carried out; flashes when integration is on stand-
by.
Lights when integration is controlled by external signals.
Lights when PC card memory is full.
Lights when the backup memory contains data.
Lights when the battery voltage is low.
Lights when the keys are locked.
Lights when data saving to the PC card is enabled; flashes during access
to the PC card.
Flashes during access to the PC when a PC is selected as the
communication device.
Flashes during access to the printer when a printer is selected as the
communication device.
Lights when the VT ratio is set at a value other than 1.
Lights when the CT ratio is set at a value other than 1.

Indications for current settings of voltage range, current range, and wiring

method:

Wiring method

Voltage range

Current range

2.4 Overrange and Other Marks Shown during Measurement

Summary of Contents for CW120














































































































































































































Reviews:

No comments

Related manuals for CW120

Camille Bauer SINEAX AM2000 Device Handbook preview
SINEAX AM2000
Brand: Camille Bauer Pages: 62
DAPAudio IEM-100 Beltpack User Manual preview
IEM-100 Beltpack
Brand: DAPAudio Pages: 19
dbx DDP Manual preview
DDP
Brand: dbx Pages: 2
janitza UMG 96-S2 Quick Manual preview
UMG 96-S2
Brand: janitza Pages: 6
janitza UMG 804 Installation Manual preview
UMG 804
Brand: janitza Pages: 36
LaserLiner PowerCross-Laser 8 S Operating Instructions Manual preview
PowerCross-Laser 8 S
Brand: LaserLiner Pages: 64
LaserLiner ClimaHome-Check Plus Manual preview
ClimaHome-Check Plus
Brand: LaserLiner Pages: 10
LaserLiner MeterMaster Plus Quick Start Manual preview
MeterMaster Plus
Brand: LaserLiner Pages: 104
LaserLiner ThermoSpot Operating Instructions Manual preview
ThermoSpot
Brand: LaserLiner Pages: 52
LaserLiner LaserRange-Master T2 Manual preview
LaserRange-Master T2
Brand: LaserLiner Pages: 52
LaserLiner ArcoMaster 40 Quick Start Manual preview
ArcoMaster 40
Brand: LaserLiner Pages: 5
LaserLiner CombiRangeXtender 40 Operating Instructions Manual preview
CombiRangeXtender 40
Brand: LaserLiner Pages: 84
LaserLine SuperCross-Laser 2P Operating Instructions Manual preview
SuperCross-Laser 2P
Brand: LaserLine Pages: 92
LaserLine MoistureFinder Compact Manual preview
MoistureFinder Compact
Brand: LaserLine Pages: 56
LaserLiner LaserRange-Master Gi7 Pro Operating Instructions Manual preview
LaserRange-Master Gi7 Pro
Brand: LaserLiner Pages: 56
Laser Tools 5846 Instructions preview
5846
Brand: Laser Tools Pages: 4
LaserLiner SmartVision-Laser Quick Start Manual preview
SmartVision-Laser
Brand: LaserLiner Pages: 56
R&S FSMR3000 User Manual preview
FSMR3000
Brand: R&S Pages: 733

Brands by name

Popular brands

Load more brands