7-21
IM CW120-E
Making Settings
7
(3) Press the
key to move to the data bit setting. The leftmost number in
the lower row flashes. If necessary, change the data bit setting using the
keys.
(4) Press the
key to move to the parity bit setting. The middle number in
the lower row flashes. If necessary, change the parity bit setting using the
keys.
(5) Press the
key to move to the stop bit setting. The rightmost number in
the lower row flashes. If necessary, change the stop bit setting using the
keys.
(6) After making all necessary changes, press the
key. The settings
are changed accordingly and the setting item selection screen returns.
To cancel the changes, press the
key. The setting item selection
screen also returns.
TIP
• You can move between the baud rate, data bit, parity bit, and stop bit settings from one to another in
the reverse direction by using the
key.
• Resetting the system using a command via communication leaves the baud rate, data bit, parity bit,
and stop bit settings unchanged.
7.2 Setting Each Item
