7-1
IM CW120-E
Making Settings
7
Chapter 7. Making Settings
7.1
Setting Items and Item Selection
●
Setting Items
Before starting measurement, the following measurement condition and
data saving settings should be made as necessary.
Setting Item
Display Mark
1. Device number
2. Loading and saving of settings
3. Deletion of measured-data file and formatting of PC card
4. Clearance of electric energy count and resetting of system
5. Copying and clearance of backup memory
6. Date
7. Output interval
8. Integration start date and time
9. Integration stop date and time
10.Data saving to PC card
11.Communication device selection
12.Communication settings
13.VT ratio setting
14.CT ratio setting
15.Clamp-on current probe selection
16.Decimal point position and unit selections for electric energy
TIP
The Setting Check Sheet in the back of
Operation Guide (IM CW120P-E) lists necessary settings and
their available selections. Use this sheet for grasping the setting conditions and for efficient setting on
site.
