7-32
IM CW120-E
7.3
Setting Name of Measured-data File
When saving the measured data in the electric energy measurement mode,
you can set the name of the file to which measured data is to be saved.
File name = xxxxxxxx.CSV
Name (xxxxxxxx): Eight or less characters
Filename extension: Always CSV
Command:
INTEgrate:STORe:FILEname
Filename
When the file name is set, the set file name is displayed on the power meter’s
screen (called by pressing the
key) as shown below.
NOTE
• Once the file name is set, it remains the same even though integration is repeatedly performed,
namely, the measured data will be added to the same file.
• To reset the file name setting, reset the system or set the file name to ””.
• If the file name is not set, it will be assigned automatically.
SEE ALSO
For details of communication, see Chapter 11, “Communication Functions” and Chapter 12, “Communi-
cation Commands.”
