manualshive.com logo in svg

YOKOGAWA CW120, User Manual

The YOKOGAWA CW120 is a versatile and highly reliable device designed for precise electrical measurement. To ensure optimal usage, a comprehensive User Manual is available for free download from manualshive.com. This manual provides detailed instructions and valuable insights to enhance your experience with the CW120, guaranteeing accurate results each time.

Share
Download
background image

9-8

IM CW120-E

Automatic Stop at Specified Time on Specified Date

This is a method in which you set the integration stop date and time via the

setting screen.  The stop date and time settings are effective only when

integration has begun automatically at the start date and time set.  For the

setting procedure, see “Measurement Procedure” in Section 9.1, “Measuring

Electric Energy,” and Section 7.2.9, “Setting Integration Stop Date and Time.”

When the set stop time and date have been reached, the 

  mark

disappears from the screen, the LED status indicator immediately above the

 key extinguishes, integration stops, and the screen changes as shown

below, indicating that integration has stopped.

Screen Showing End of Integration 

Pressing any key returns to the screen for instantaneous value measurement.

TIP

• Set the stop date and time such that the period from the start to the end of integration is not shorter

than the output interval.  Otherwise, only the data at the start and end times will be saved.

• Manually starting integration makes the stop date and time settings ineffective.  You need to stop

integration manually in this case.

• If the start date and time are set to later than (in the future) the stop date and time, the stop date and

time will be changed to the time after the start date and time for the output interval.

• If the integration starts at a time after (in the future) the set stop date and time, the stop date and time

settings become ineffective.  You need to stop integration manually in this case, too.

• As the stop date and time, you cannot set a time earlier than (in the past) the start date and time.

9.2  Starting and Stopping Integration

Summary of Contents for CW120














































































































































































































Reviews:

No comments

Related manuals for CW120

Keithley 580 Operator'S Manual preview
580
Brand: Keithley Pages: 73
Macnaught MH450 Manual preview
MH450
Brand: Macnaught Pages: 4
Keit IRmadillo DOC1048R User Manual preview
IRmadillo DOC1048R
Brand: Keit Pages: 27
techem Vario 4 Typ 4.5.1 Operating Instructions Manual preview
Vario 4 Typ 4.5.1
Brand: techem Pages: 142
PASCO PS-3234 Product Manual preview
PS-3234
Brand: PASCO Pages: 4
ABQ Industrial DELMHORST J-2000 Owner'S Manual preview
DELMHORST J-2000
Brand: ABQ Industrial Pages: 4
General DTH3007SD User Manual preview
DTH3007SD
Brand: General Pages: 12
MADDALENA Arrow Mobile Android Quick Start Manual preview
Arrow Mobile Android
Brand: MADDALENA Pages: 12
Elko iNELS Air AirCFS-100S Manual preview
iNELS Air AirCFS-100S
Brand: Elko Pages: 4
PCE Health and Fitness PCE-VE 320 Manual preview
PCE-VE 320
Brand: PCE Health and Fitness Pages: 7
sewerin Multitec 520 Operating Instructions Manual preview
Multitec 520
Brand: sewerin Pages: 80
YOKOGAWA MG8E User Manual preview
MG8E
Brand: YOKOGAWA Pages: 63
BGS technic BGS 8639 Instruction Manual preview
BGS 8639
Brand: BGS technic Pages: 16
Trotec OZ-ONE Manual preview
OZ-ONE
Brand: Trotec Pages: 8
Liquid Controls A8981 Installation And Parts preview
A8981
Brand: Liquid Controls Pages: 16
M-Audio ProKeys 88sx User Manual preview
ProKeys 88sx
Brand: M-Audio Pages: 21
ICP DAS USA PMC series User Manual preview
PMC series
Brand: ICP DAS USA Pages: 340
Molectron ENERGY MAX EM400 User Manual preview
ENERGY MAX EM400
Brand: Molectron Pages: 40

Brands by name

Popular brands

Load more brands