YOKOGAWA CQ1 User Manual Download Page 237

Page: 237 / 268

<6. Maintenance>

6-1

IM 80J01A01-01E

Maintenance

6.1

Maintenance of Workstation



System requirement

CQ1 system requires system (C:) disk drive whose volume is

larger than 200GB.



Keep free space of hard disk drive

For measurement, please keep free space of system (C:) disk

drive larger than 30GB, and data (D:) disk drive larger than 1GB.



Defragmentation of hard disk drive

Fragmentation becomes advanced by repeating write and deletes

data. Please do defragmentation of hard disk drive (both data (D:)

and system (C:)) once in a half year, at least.

Procedure: Open the defragmentation window from property of

disk. Run [Analyze disk] and check the progress of fragmentation.

Then run [Defragmentation of disk].

Summary of Contents for CQ1













































































































































































































































































Search results

Summary of Contents for CQ1

Reviews:

YOKOGAWA CQ1, User Manual, Page: 237 / 268

Search results

Summary of Contents for CQ1

Reviews: