YOKOGAWA CQ1 User Manual Download Page 100

Page: 100 / 268

5-4

<5. Functions of CQ1 Software>

IM 80J01A01-01E

(3) Load Measurement Protocol

Load measurement condition fle designated by file read-in dialog.

In CQ mode, conditions such as objective lens, sample vessel, Z

stack, Fields to be imaged and analysis conditions are applied.

Fields to be imaged aren

’t applied if stage attachment and sample

holder

isn’t matched.

In HDD mode, only analysis conditions are applied.

(4) Save Contrast and Region View Setting

This function is valid only in HDD mode. Save

“Contrast

Enhancement

” and “Region” setting of Tool function (Refer to

5.6.9 Tool Function

). In case of not analyzed data, only

“Contrast

Enhancement” setting is saved.

(5) Exit

Exit from CQ1 Software.

Summary of Contents for CQ1













































































































































































































































































Search results

Summary of Contents for CQ1

Reviews:

YOKOGAWA CQ1, User Manual, Page: 100 / 268

Search results

Summary of Contents for CQ1

Reviews: