YOKOGAWA CQ1 User Manual Download Page 105

Page: 105 / 268

<5. Functions of CQ1 Software>

5-9

IM 80J01A01-01E

5.3.2

Operation Mode Panel in HDD Mode.

(1) Control Panel Display SHOW/HIDE Button

Button to change SHOW/HIDE of control panel display.

：

Click to HIDE control panel display

：

Click to SHOW control panel display

(2) CQ Mode Button

Click to shift CQ1 Software to CQ mode. Cannot click it during

analyzing measurement data. (Refer to

5.1 Outline

(1) CQ Mode)

(3) HDD Mode Button

Highlighted in the HDD mode but nothing happens by clicking this

button. (Refer to

5.1 Outline

(2) HDD Mode)

(4) Analyze Button

To start analysis of measurement data, select saved data on

control panel, set analysis conditions at

“Application window” and

“Analysis window”, and click this button.

(5) Stop Button

Click to stop data analysis.

(1)

(2)

(3)

(4)

(5)

Summary of Contents for CQ1













































































































































































































































































Search results

Summary of Contents for CQ1

Reviews:

YOKOGAWA CQ1, User Manual, Page: 105 / 268

Search results

Summary of Contents for CQ1

Reviews: