YOKOGAWA CQ1 User Manual Download Page 127

Page: 127 / 268

<5. Functions of CQ1 Software>

5-31

IM 80J01A01-01E

(5) Objective Lens

Select objective lens here. Selected lens is highlighted.

(6) Time-lapse Setting

Switch the time-lapse acquisition mode (normal mode/ fast mode

(option)).

If you

didn’t buy this option, this menu isn’t shown and the time-lapse

acquisition mode is always normal mode.

①

Normal

In this mode, sequence of imaging in each well, field, channel and

Z slice has a priority. These sequences of imaging are performed

at interval and duration set at

“Time-lapse Condition” described

below.

②

Fast (option)

In this mode, time-lapse imaging has a priority. Time-lapse

imaging of speed and time length set at

“Fast Time-lapse

Condition

” is performed in each well and field. Numbers of channel

and Z slice are fixed to

“1”. When switching to this mode, the

selected channel remains and the others are removed

automatically. Also,

“Chromatic Abberation” becomes invalid

automatically.

This mode is not correspond to on-the-fly analysis. To analyze

image data acquired by this mode, it is necessary to acquire image

data by CQ mode then analyze by HDD mode.

①

②

Note

Don

’t select “Fast” mode if setting of folder structure of saving

data is

“By Time Point” (Refer to

5.11 User Setting

In case to use

“Fast” mode, select Main Menu -> “Option” ->

“User Setting” and select setting other than “By Time Point”.

Summary of Contents for CQ1













































































































































































































































































Search results

Summary of Contents for CQ1

Reviews:

YOKOGAWA CQ1, User Manual, Page: 127 / 268

Search results

Summary of Contents for CQ1

Reviews: