manualshive.com logo in svg

YOKOGAWA CA700-01, User Manual, Page: 94 / 107

Share
Download
YOKOGAWA CA700-01 User Manual Download Page 94

6-7

IM CA700-01EN

Other Settings

1 

2 

3 

4 

5 

6

7

Index

6.4  Holding Displayed Values and Displaying Min/

Max Values

Procedure

Holding Displayed Values

1.

  When measured values are displayed on the screen, press 

HOLD

 on the CA700 front panel.

HOLD appears on the screen, and the measured values are held. You will only be able to use the HOLD 
and 

 keys.

 

   

Holding 

2.

  To release the hold, press 

HOLD

 again.

Min/Max Value Display

1.

  When measured values are displayed on the screen, press 

MIN/MAX

 on the CA700 front 

panel.

The minimum and maximum values are displayed on the screen.

 

   

The minimum and maximum values 

2.

  To clear them, press 

MIN/MAX

 again.

Explanation

Holding Displayed Values

You can use the hold feature to hold the display. While the display is held, “HOLD” is displayed at the 
top of the screen, and you will only be able to use the HOLD and 

 keys.

Min/Max Value Display

The min/max feature displays the minimum and maximum values of the measured pressure, current 
and voltage.
This feature is not available during leak pressure measurement.
The following features are disabled while minimum and maximum values are displayed.
•  Auto power-off
•  Measurement range change
•  Relative display (based on the reference value)
•  Zero calibration

Summary of Contents for CA700-01












































































































Reviews:

No comments