Source and Measure
2.3 Generating DC Current and DC Voltage
Sweeping the Source Value
Setting the Source Method
8.
After step 7, press
Setting (F5)
.
Setting categories appear on the function menu.
Function menu
9.
Press
Step Setting (F3)
.
The source method setting screen appears.
Set the lower span limit.
Confirms the settings
Set the upper span limit.
Set the number of divisions for sweeping in steps.
Set the source time.
Set the repeat mode.
Set the sweep method.
Setting the Span
Set the source current or voltage range.
10.
Use the ▲ or ▼ key to select
Span Lower
, and press ENTER.
11.
Press the or
key to move to the digit you want to change, press the ▲ or ▼ key to set the
number.
To confirm the value, press
ENTER
.
Likewise, set Span Upper.
Setting the Number of Divisions
12.
Use the ▲ or ▼ key to select
Number Of Points
, and press
ENTER
.
13.
Press the or
key to move to the digit you want to change, press the ▲ or ▼ key to set the
number.
To confirm the value, press
ENTER
. The CA700 divides the range between the lower and upper
span range by the specified number, and generates source signals at the divided levels.
Setting the Source Time
14.
Press the ▲ or ▼ key to select Time Per Step.
Source time options appear on the function menu.
15.
Press a key from
15sec (F1)
to
60sec (F4)
.
Setting the Repeat Mode
16.
Press the ▲ or ▼ key to select
Repeat Mode.
Repeat modes appear on the function menu.
17.
Press
Single Shot (F1)
or
Cont.(F2)
.
2-13
IM CA700-01EN
1
2
3
4
5
6
7
Index