manualshive.com logo in svg

YOKOGAWA CA700-01, User Manual, Page: 34 / 107

Share
Download
YOKOGAWA CA700-01 User Manual Download Page 34

Source and Measure

Sweeping (Stepping) Manually

21.

 After step 20, press 

Step/Sweep (F1)

.

 

   

Starts output 

 

Upper or lower span limit 

One step up

One step down

22.

 Press 

Span 100% (F3)

 or 

Span 0% (F3)

 to set the output value to the upper or lower span limit. 

Press 

Step Up (F4)

 or 

Step Down (F5)

 to change the output by the step value specified in the 

output method.

 

You can also set a specific output value by using the  , 

, ▲, and ▼ keys.

23.

 Press 

Source On (F2)

.

The F2 key changes to Source Off, the output status display changes to SOURCE ON, and the CA700 
generates the specified DC current or DC voltage.

 

You can step up or down the output value while the CA700 is generating output by following 
step 22.

Saving Data

24.

 While the CA700 is generating output, press 

ESC

.

The previous screen returns.

 

   

25.

 Press 

Save (F3)

 or 

Logging Start (F3)

. The source value is saved along with the pressure 

measurement data.

What appears at F3 varies depending on the data save method.

Note

For details on setting the data save method (Save or Logging), see section 4.1.

2.3  Generating DC Current and DC Voltage

2-15

IM CA700-01EN

1 

2 

3 

4 

5 

6

7

Index

Summary of Contents for CA700-01












































































































Reviews:

No comments