YOKOGAWA CA700-01 User Manual Download Page 86 | Manualshive

Page: 86 / 107

YOKOGAWA CA700-01 User Manual Download Page 86

5-18

IM CA700-01EN

5.5 Status Byte Format

Device Status Byte

Status byte format (see the explanation of the <ESC S> command)

bit 7

bit 6

bit 5

bit 4

bit 3

bit 2

bit 1

bit 0

0 (fixed)

1 (fixed)

Output error 24 V power

supply error

Over-range Syntax error Output

change

completion

Measurement

complete

bit 7:  Fixed to 0.
bit 6:  Fixed to 1.
bit 5:  Set to 1 when an error occurs during output.

The information is retained until the status byte is read.

bit 4: Set to 1 when an error occurs in the 24 V loop measurement power supply.

The information is retained until the status byte is read.

bit 3: Set to 1 when a measurement over-range occurs.

In auto-range operation, this bit is set to 1 when the CA700 switches to the higher range.

The information is retained until the status byte is read.

bit 2: Set to 1 when a prohibited operation or command is processed, when the command cannot be

interpreted, or when a parameter is outside the setting range.

The information is retained until the status byte is read.

bit 1: Set to 1 when the output stabilizes after it is changed with the output turned on.

The information is retained until the status byte is read.

bit 0: Set to 1 when measured data is confirmed during measurement.

The information is retained until the status byte is read.

«
...
84
85
86
87
88
...
»

Summary of Contents for CA700-01












































































































Reviews:

No comments