YOKOGAWA CA700-01, User Manual, Page: 77 / 107

5-9
IM CA700-01EN
1
2
3
4
5
6
7
Index
Remote Control
[FMN command] Queries the model number of the external sensor.
FMN Queries the model number of the external sensor. Normal Adjustment
Command = FMN?<CRLF> → Answer = PM100-x-yy-zz<CRLF>
Parameters
x: Basic use code 01
yy: Basic use code 02
zz: Basic use code 03
To set the user calibration date of the external pressure sensor, you
need to set Function to EXT P or EXT LEAK.
Yes Yes
[FSN command] Queries the serial number of the external sensor.
FSN Queries the serial number of the external sensor. Normal Adjustment
Command = FSN?<CRLF> → Answer = xxxxxxxxx<CRLF>
Parameters
xxxxxxxxx : serial number
To set the user calibration date of the external pressure sensor, you
need to set Function to EXT P or EXT LEAK.
Yes Yes
[H command] Sets or queries the presence or absence of output data (OD) headers.
H Sets or queries the presence or absence of output data (OD)
headers.
Normal Adjustment
Command = Hm<CRLF> → Answer = Hm<CRLF>
Command = H?<CRLF> → Return = Hm<CRLF>
Parameters
m = 0: No headers (default value)
1: With headers
This setting is valid until the CA700 is turned off.
Yes Yes
[HD command] Holds or queries the measurement value display.
HD Holds or queries the measurement value display. Normal Adjustment
Command = HDm<CRLF> → Answer = HDm<CRLF>
Command = HD?<CRLF> → Return = HDm<CRLF>
Parameters
m = 0: Display updating (default value)
1: Data hold
Yes No
5.4 Commands