YOKOGAWA CA700-01 User Manual Download Page 13 | Manualshive

Page: 13 / 107

YOKOGAWA CA700-01 User Manual Download Page 13

1-6

IM CA700-01EN

Saving Calibration Data

You can save calibration data to a file. If you adjust a transmitter, the data before and after the
adjustment can be saved to files with the following file names.

File Name

The name of the file for data before adjustment is MSxxF_y.CSV where

  MS:    Fixed (measurement/source file)
  xx:    Calibration group number (00 to 99)
  F:     Fixed (data before adjustment)
  y:      File number (0 to 9)

The name of the file for data after adjustment is MSxxL_y.CSV where

  MS:    Fixed (measurement/source file)
  xx:    Calibration group number (00 to 99)
  L:      Fixed (data after adjustment)
  y:      File number (0 to 9)

The calibration group number remains the same as long as the calibration target information

or calibration procedure remain unchanged. Therefore, the calibration data files of the same
transmitter before and after adjustment will have the same calibration group number.

Saved Information

The following information is saved in a calibration data file.

•  Instrument information
•  Calibration procedure information
•  Calibration date
•  CA700 serial number
•  Calibration result

Pressure Switch Calibration

In the calibration procedure in “Transmitter Calibration,” if you select pressure switch (P SWITCH, EXT
SWITCH) for measurement, you can calibrate pressure switches.
The CA700 measures the pressure required for the switch to open and close, the difference between
the open and close pressures, and the resistance when the switch is closed.
The CA700 can calibrate mechanical pressure switches. It cannot be used to calibrate open-collector-
contact, voltage-output, or current-output pressure switches.

Saving Calibration Data

Like transmitter calibration, the calibration results can be saved.

File Name

The name of the file for data before adjustment is SWxxF_y.CSV where

  SW:    Fixed (pressure switch test data file)
  xx:    Calibration group number (00 to 99)
  F:     Fixed (data before adjustment)
  y:      File number (0 to 9)

The name of the file for data after adjustment is SWxxL_y.CSV where

  SW:    Fixed (pressure switch test data file)
  xx:    Calibration group number (00 to 99)
  L:      Fixed (data after adjustment)
  y:      File number (0 to 9)

1.3 Calibration Feature

«
...
11
12
13
14
15
...
»

Summary of Contents for CA700-01












































































































Reviews:

No comments